Dryer Vent Cleaning in Fresno - One Price, Measured Results

Fast, Reliable Dryer Vent Cleaning Across Fresno

Dryer vent cleaning in Fresno typically costs $150-$280 for a standard single-family home, and most jobs take 90 minutes to two hours from arrival to cleanup. If your dryer takes two cycles to dry a load, or if you notice a burnt-lint smell near the laundry room, the vent is probably clogged and needs attention soon.

Call (323) 918-4345

We’re Morton’s Air Duct Cleaning, and our Fresno office dispatches crews daily across the city, from the older ranch homes near West Shaw Avenue to the newer tracts north of Herndon. We know the local housing stock: the 1960s-1980s homes with attic-flex retrofits, the 1990s-2000s builds with sagging builder-grade duct, and the fine reddish-tan agricultural soil dust that coats everything north of Shaw Avenue during spring plowing season. Our technicians carry shoe covers and drop cloths on every visit, use quieter tools when there’s a napping toddler down the hall, and always provide a written price before touching anything. Call (323) 918-4345 for a free estimate.

Why Morton’s Air Duct Cleaning Is Fresno’s Preferred Dryer Vent Cleaning Company

Fresno families have called us since 2005 because we treat their homes the way we’d want ours treated. That means background-checked, uniformed technicians who notice the dog on the floor and work around nap schedules. It means professional-grade Rotobrush and Nikro equipment, not rental-shop gear. And it means our 365-Day Done Right Promise: if something isn’t right, we make it right, full stop.

Our reputation here is built on specifics. We show you the lint we removed. We photograph the clean-up before we leave. We don’t quote one price on the phone and deliver another on the invoice. Every job is backed by the Cedarwell Care Promise: shoe covers and drop cloths from the moment we walk in, a written price agreed before work starts, and visual proof your home is left better than we found it. A live person answers our phone 24/7, not a voicemail tree.

Local knowledge matters for this work. Fresno’s forced-air homes were often retrofitted through attic spaces after original construction, and attic temps that exceed 150°F break down flex-duct liners, creating leaks that pull valley dust into the system for decades - a dynamic that doesn’t occur in coastal California homes with milder attic temperatures. Our crews know what to look for: crushed runs where the duct crosses rafters, disconnected joints hidden behind insulation, and the lint-packed gaps that form where heat-degraded liner has separated from the wire coil. We’ve restored airflow to hundreds of Fresno dryers that other companies had declared “fine” because they never inspected the attic run.

Dryer Vent Repair in Fresno

Dryer Vent Repair in Fresno addresses the mechanical failures that cleaning alone won’t fix: crushed flex duct, disconnected joints, improper routing through hot attics, and damaged vent caps that let in pests and agricultural dust. Most repairs run $200-$450 depending on how much rigid metal duct we need to install and whether we must reroute the vent to a shorter, straighter path. We always inspect with a camera first, show you what we found, and quote a flat price before any cutting or connecting begins.

Crushed or Disconnected Attic Runs

The most common repair we make in central and southwest Fresno homes involves flex duct that has been crushed by storage boxes, degraded by attic heat, or pulled apart at couplings. On a 1972 ranch off West Shaw Avenue in central Fresno, our techs ran a camera inspection of the dryer vent and found the flex duct crushed and disconnected where it passed through the attic, with lint packed into the gap. We removed the failed section, reconnected it with rigid metal duct, and used negative pressure and HEPA filtration during cleanup. After the repair, airflow at the exterior vent was restored and we sealed the attic penetration to keep out the fine reddish-tan agricultural soil dust common north of Shaw.

Vent Rerouting and Bird Guard Installation

Some Fresno homes have dryer vents that run 30-plus feet with multiple bends, or that terminate under eaves where lint collects and moisture damages siding. We reroute to shorter, straighter paths using rigid metal duct where code allows, and we install bird guards and proper vent caps to keep out pigeons, sparrows, and the agricultural debris that blows in during valley wind events.

Dryer Vent Cleaning Company in Fresno

Dryer Vent Cleaning Company in Fresno means more than blowing out lint with a leaf blower. At Morton’s, we use professional Nikro and Rotobrush equipment to agitate and extract lint from the full vent run, including the hidden attic sections that homeowners never see. A standard cleaning for a Fresno single-family home runs $150-$280; homes with second-story laundry rooms or long vent runs may fall at the higher end. We clean the lint trap housing, the transition duct behind the dryer, and the full exterior run to the vent cap.

Camera Inspection and Documentation

Every cleaning starts with a camera inspection so we can show you exactly what’s in your vent. You’ll see the lint accumulation, any sagging or pooling points, and whether the duct material is proper rigid metal or the flammable flex duct still found in many older Fresno homes. No guesswork, no scare tactics - just the picture and the plan.

HEPA Containment and Agricultural Dust

Fresno’s San Joaquin Valley location means our dryer vents don’t just collect lint. They collect the fine soil particulates that blow in during spring ground disturbance and fall agricultural burning. Our Nikro negative-air machines with HEPA filtration capture this debris rather than blowing it back into your laundry room. We work to the Cedarwell C.A.R.E. values: Controlled, Accountable, Respectful, and Excellent. That means drop cloths under our tools, quiet operation when kids are sleeping, and pet-safe cleanup products where available.

Trusted Brands We Service in Fresno

Our vans carry professional-grade equipment from Nikro, Honeywell, and Aprilaire - brands chosen because they hold up to daily use in harsh conditions, including Fresno’s 150°F attics and dust-heavy environment. We stock common vent caps, bird guards, and rigid metal duct fittings locally so most repairs don’t require a return trip. For homes with integrated Honeywell or Aprilaire ventilation systems, we coordinate dryer vent work with whole-house airflow balancing. This isn’t rental equipment that loses suction halfway through the job. It’s the same gear we use on commercial accounts across the Central Valley, maintained on schedule and replaced before it wears out.

Common Dryer Vent Cleaning Problems We See in Fresno Homes

• Builder-grade flex duct sagging in north Fresno tracts. Homes built from the 1990s through the 2000s in areas like Clovis Avenue and Herndon corridors often have thin flex duct that sags between rafters, creating low points where lint pools and restricts airflow. We replace these runs with rigid metal duct pitched for proper drainage.
• Heat-degraded attic retrofits in 1960s-1980s central Fresno ranches. The original homes near Blackstone, Shaw, and Kings Canyon were built before forced-air laundry rooms were standard. The retrofit flex duct has spent decades in 150°F attics. Liner breaks down. Wire coils separate. Lint leaks into insulation and the duct collapses or disconnects entirely.
• MERV-8 filters failing to stop agricultural soil dust. Standard filters in older Fresno installs can’t intercept the fine reddish-tan soil particulates that blow in from surrounding farmland. This dust coats duct interiors, mixes with lint, and creates a dense, fire-prone mat that builds up faster than in coastal cities where outdoor air carries less mineral debris.
• Improper vent terminations under eaves or behind landscaping. Some Fresno builders terminated dryer vents in locations that seemed convenient during construction but trap moisture against siding or get buried by mature shrubs. We relocate these to code-compliant wall or roof terminations with proper clearance.

Pricing for Dryer Vent Cleaning in Fresno, CA

We Also Serve Cities Near Fresno

Our Dryer Vent Cleaning crews work throughout the Central Valley, including Clovis, Madera, Sanger, and Fowler. Scheduling and dispatch are coordinated from our Fresno office, so response times to these surrounding communities are typically same-week. We bring the same equipment, the same Cedarwell Care Promise, and the same written-upfront pricing to every home in the service area.

FAQs About Dryer Vent Cleaning in Fresno