Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Lilburn
Dryer vent cleaning in Lilburn, GA typically runs $150-$275 for a standard single-family home, and most jobs are completed in under two hours with the dryer back in service the same day. If you’re running loads twice to get towels dry, or your laundry room feels hotter than it should, the vent is likely choked with lint mixed with the red-clay dust and pine pollen that’s particular to this part of Gwinnett County.
We serve Lilburn from our Atlanta dispatch office, with crews that know the difference between a standard tract home off Five Forks Trickum Road and a rural-edge property down a gravel drive near Killian Hill. That local knowledge matters because the vent system in a 1970s ranch on a paved cul-de-sac fails differently than one in a converted barn with a 25-foot run through an unconditioned crawlspace. Our technicians arrive in uniform, background-checked, with shoe covers and drop cloths already on hand. We’ll give you a written price before we touch anything, and we photograph the clean-up before we leave. Call (323) 918-4345 to schedule or ask questions; a live person answers, day or night.
Why Morton’s Air Duct Cleaning Is Lilburn’s Preferred Dryer Vent Cleaning Company
We’ve been part of the Cedarwell family since 2005, and our Lilburn customers come back because we treat the house like it’s our own. That means quiet tools when there’s a toddler napping down the hall, pet-safe product choices where they apply, and a crew that notices the dog on the floor before they wheel equipment through.
Our Dryer Vent Cleaning in Lilburn reputation is built on specifics, not slogans. The 365-Day Done Right Promise is stamped on every job, not offered only when asked. If something isn’t right, we make it right. Full stop. Every visit includes a written price upfront, photo proof of the clean-up, and the Cedarwell Care Promise in action: shoe covers, drop cloths, and technicians who work to the C.A.R.E. values.
Calls are answered by a live person 24/7, not a voicemail tree. Scheduling is coordinated from our Atlanta office, but the crew that shows up knows Lilburn’s older neighborhoods, its rural-edge lots, and the particular vent configurations common in 1970s and 1980s Gwinnett construction.
Dryer Vent Installation in Lilburn
Dryer Vent Installation in Lilburn becomes necessary when the existing run is too long, too convoluted, or routed through material that no longer meets code. Many homes in Lilburn’s 1970s and 1980s build-out were originally fitted with flexible transition duct or thin-wall PVC that degrades in attic heat and can sag in crawlspace humidity. A proper installation replaces that with rigid or semi-rigid metal duct, sized correctly for the dryer’s CFM rating, with the fewest bends possible. In Lilburn’s market, a standard dryer vent installation runs $350-$650, with complex reroutes through crawlspaces or to new exterior wall locations reaching $800-$1,200.
When Rerouting Makes Sense
A dryer vent that runs more than 25 feet or makes more than two 90-degree turns loses effective airflow and traps lint. We see this constantly in Lilburn’s split-level homes, where the laundry was tucked into a central closet with a convoluted path to the nearest exterior wall. Rerouting to a closer termination point often pays for itself in energy savings and reduced fire risk.
Code-Compliant Materials
We install only rigid aluminum or galvanized steel duct, sealed with foil tape or proper mechanical fasteners. No flexible foil, no PVC, no duct tape. Our crews carry the fittings and hardware needed for same-day completion on most Lilburn jobs.
Dryer Vent Repair in Lilburn
Dryer Vent Repair in Lilburn addresses the damage that Lilburn’s climate and housing age inflict on vent systems: disconnected joints in crawlspaces, corroded terminations, sagging flex duct, and flappers seized shut by pollen and dust. Repair work ranges from $125 for a simple reconnection or cap replacement to $300-$450 for section replacement in a crawlspace or attic run. We diagnose the failure before quoting, so you know exactly what’s broken and what it’ll cost to fix.
Crawlspace and Attic Damage
Lilburn’s humidity is hard on metal. Duct in unconditioned spaces corrodes at joints, and the straps holding it in place rust through. We find this especially in homes off Five Forks Trickum Road and along the Killian Hill corridor, where original 1970s installations are now fifty years old. Our repair includes new support straps, sealed joints, and a post-repair airflow test.
Exterior Termination Failures
The vent cap is the most exposed component. Bird guards clog, flappers stick, and the housing cracks in Georgia sun. We stock replacement caps and guards sized for standard 4-inch duct, and we install them with proper clearances to prevent recirculation into soffits or windows.
Trusted Brands We Service in Lilburn
Our crews work with professional-grade equipment from Nikro, Honeywell, and Aprilaire, not rental-shop vacuums. For dryer vent jobs, that means Nikro high-velocity negative-air machines and HEPA-filtered collection systems that capture fine ash and sawdust without redistributing it through your laundry room. We stock common repair parts locally, so a cap replacement or section repair doesn’t mean waiting on shipping. When we need to pull a Guardsman lint trap assembly or replace a damaged transition, the part is usually on the van already. That matters in Lilburn, where rural-edge properties with longer drives already cost us travel time; we don’t waste more of your afternoon running to a supplier.
Common Dryer Vent Cleaning Problems We See in Lilburn Homes
- Compacted lint-clay shelves in rural-edge homes. On properties with unpaved drives, red-clay dust infiltrates the laundry area, mixes with lint in the transition duct, and bakes into a hard shelf near the first elbow. Ordinary brushing skims the surface; our Nikro agitation tools break it up for source removal.
- Outbuilding and garage laundry setups that get forgotten. The main-house vent gets attention every few years, but the converted barn or detached garage dryer runs for a decade without service. Those longer runs accumulate more lint and have weaker airflow to begin with.
- Fine wood-ash infiltration in homes with wood heat. Sawdust and ash particles slip past standard lint traps and settle deep in the lint pathway. Homeowners check the trap, see it clean, and assume the vent is fine. It isn’t.
- Sagged flex duct in crawlspaces. Lilburn’s humidity softens the wire helix in cheap flex duct, creating low points where lint and condensation pool. The duct looks intact from the ends but is partially blocked in the middle.
Pricing for Dryer Vent Cleaning in Lilburn, GA
A standard dryer vent cleaning in Lilburn runs $150-$275 for a single-family home with a typical 10-15 foot run and accessible termination. Rural-edge properties with longer runs, outbuilding setups, or compacted clay-lint shelves that need agitation work fall in the $250-$400 range. Dryer vent installation costs $350-$650 for straightforward jobs, $800-$1,200 for complex reroutes. Repairs run $125-$450 depending on location and extent.
What moves the number: run length, number of bends, accessibility (crawlspace vs. first-floor wall), and whether we find a blockage that needs more than standard brushing. We give you one flat price per system, agreed in writing before work starts. No per-foot add-ons, no surprise charges when we find something unexpected. Call (323) 918-4345 for a free estimate; we’ll ask about your setup and give you a real number you can plan around.
We Also Serve Cities Near Lilburn
Our crews cover the full Gwinnett corridor, including Lilburn, Snellville, Lawrenceville, Grayson, and Buford. Same written-price guarantee, same 365-Day Done Right Promise, same live-answer scheduling line. If you’re on the edge of our service area, call and we’ll confirm drive time; we don’t book jobs we can’t show up for.
Serving Lilburn, GA - Our Local Coverage Area
We’re based in the Lilburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Lilburn
Every 9-12 months, not the 3-5 years a standard suburban home can sometimes manage. The combination of gravel-road dust, wood-heat ash, longer runs, and pollen loads in Lilburn’s rural-edge properties creates compacted blockages that standard lint traps can’t catch. If you’re on an unpaved drive or run a wood stove, lean toward the 9-month interval. Call (323) 918-4345 and we’ll put you on a reminder schedule.
From the outside, the flapper barely moves when the dryer runs. Inside, we often find a hard, mud-colored shelf of lint fused with red-clay dust and pine pollen, usually at the first or second elbow. On a rural property off Killian Hill Road, our tech pulled a Guardsman lint trap and found exactly that: a compacted mass that agitation tools and negative pressure removed in sections. The homeowner’s dry time dropped from 90-plus minutes to a normal cycle the same afternoon. If your loads are taking two cycles, that’s what your vent probably looks like.
Yes. Outbuilding runs are often longer, pass through unconditioned space, and get serviced less frequently. The airflow is weaker to start with, so lint accumulates faster. We use the same Nikro equipment but may need to access the run from multiple points, and we always inspect the full length with a camera to find sags or disconnections hidden in walls or soffits. The price reflects the additional access time, and we quote it upfront.
We follow NADCA-recommended practices for source removal and mechanical agitation, adapted for dryer vent systems specifically. That means negative-pressure containment, HEPA filtration on the collection side, and post-cleaning airflow verification. For dryer vents, we also verify proper termination clearance and flapper operation, which NADCA doesn’t specifically address but fire safety codes do.
It can. Wood heat produces fine ash and sawdust that circulates through the house, settles in the laundry area, and slips past standard lint traps. That material is lighter than lint and travels deeper into the vent before depositing, creating a fine, dense layer that ordinary brushing won’t fully remove. We see this regularly in Lilburn’s older homes with supplemental wood heat. If you burn wood regularly, mention it when you call; we’ll plan the cleaning interval and technique accordingly.
Written by Paul Adeyemi, Owner at Morton’s Air Duct Cleaning, serving Lilburn since 2005.