Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Lowell
Dryer vent cleaning in Lowell typically runs $180-$340 for a standard single-family or condo unit, and most jobs are completed in under two hours with the dryer back in service the same day. We’re familiar with the tight parking on Moody Street, the triple-decker density of the Acre, and the maze-like brick chases of the Boott Mills conversions. Our crews coordinate dispatch from our Boston office and carry the long hose runs and portable power needed for Lowell’s older housing stock. If your dryer’s taking two cycles or your lint trap’s clean but clothes still come out damp, call (323) 918-4345 for a free estimate.
Why Morton’s Air Duct Cleaning Is Lowell’s Preferred Dryer Vent Cleaning Company
We’ve been part of the Cedarwell family since 2005, and our reputation in Lowell has been built one triple-decker at a time. Homeowners in the Lower Highlands and landlords in the Acre call us back because we show up in uniform, lay drop cloths before touching anything, and hand over a written price before the first tool comes out of the van. Our technicians are background-checked and trained to the Cedarwell C.A.R.E. values, which means shoe covers inside, quiet equipment during nap hours, and pet-safe product choices where they’re available. Every job ends with a photo of the clean-up sent before we leave, and it’s all backed by our 365-Day Done Right Promise. If something isn’t right, we make it right. Full stop.
Calls are answered by a live person, 24/7. Not a chatbot, not a voicemail tree. A real human who can schedule your appointment and answer questions about what we’ll actually do in your home.
Dryer Vent Repair in Lowell
Dryer Vent Repair in Lowell often starts with a call about slow drying that turns out to be crushed transition duct behind the unit, a sagging flex line full of water from the Merrimack valley humidity, or a vent cap damaged by ice damming on a triple-decker roof. Our repair work includes replacing damaged sections with rigid metal duct, resealing joints with proper foil tape (never screws that catch lint), and testing static pressure to confirm the dryer isn’t working harder than it should. In Lowell’s pre-1925 housing, we frequently find vents that were “repaired” with vinyl flex or duct tape by a previous owner, creating both a fire risk and an efficiency drain.
Shared Stack Diagnostics
When a vent serves multiple units in a triple-decker, a simple visual check from one apartment isn’t enough. We use camera inspection to trace the full pathway and identify where lint from an upper unit is backing into a lower run. This changes the repair scope entirely.
Moisture-Damaged Components
Lowell’s river-valley humidity rots wooden vent hoods and corrodes lightweight metal caps. We replace these with Guardsman-grade stainless or galvanized terminations built to handle wet seasons without rusting through.
Dryer Vent Cleaning Company in Lowell
Dryer Vent Cleaning Company work in Lowell demands equipment and techniques that differ from standard suburban jobs. Our crews run Rotobrush agitation systems and Nikro HEPA-filtered negative air machines, but the real difference is knowing when to use them. In a single-family home in Dracut, a rotary brush from the outside may suffice. In a Boott Mills condo with a 40-foot run through original brick, we need camera guidance, staged access points, and enough hose to reach from a curb-side parking spot three floors down. We clean the full run from dryer back to termination, remove and clean the transition duct, and inspect the vent cap for proper operation.
Triple-Decker Protocol
Shared vent stacks get a full-system clean, not a per-unit patch. We coordinate with landlords or condo associations when access to multiple floors is needed, and we document the before-and-after airflow readings for each unit.
Mill-Conversion Method
Brick chases layered with construction dust require more aggressive agitation than standard lint removal. We match brush stiffness to deposit hardness and verify with camera that the chase wall is clean, not just the duct interior.
Trusted Brands We Service in Lowell
We carry professional equipment from Rotobrush, Nikro, and Guardsman, and we stock common vent caps, transition ducts, and termination hardware for fast turnaround on Lowell repairs. No waiting a week for a specialty part to ship. For Boott Mills and other large conversions with commercial-grade dryers, we also service systems using Honeywell and Aprilaire components. Our vans are stocked for the brands we see most in Middlesex County housing, which means most repairs finish in a single visit.
Common Dryer Vent Cleaning Problems We See in Lowell Homes
- Shared masonry chases in triple-deckers. A single vent stack serving two or three stacked units accumulates lint from every dryer above. A clog on the third floor backs heat and moisture into the second-floor run, a configuration almost never seen in suburban single-family housing and one that requires full-building diagnosis.
- Brick-dust binding in mill conversions. The converted Boott Mills and canal-district condos have dryer vents routed through chases that absorbed decades of construction grit. Lint adheres to this rough surface and hardens into brush-resistant deposits that standard cleaning won’t touch.
- Excessive humidity in river-valley basements. Lowell’s Merrimack River location keeps basement humidity higher than inland communities. Wet lint packs denser, transitions ducts sag and pool water, and metal components corrode faster than spec sheets assume.
- Parking-restricted access in dense neighborhoods. The Acre and Lower Highlands often require crews to park on the next block and run 100+ feet of hose. Without proper negative pressure setup, this can compromise source containment, so we bring portable HEPA units sized for the constraint.
Pricing for Dryer Vent Cleaning in Lowell, MA
A standard dryer vent cleaning in Lowell runs $180-$280 for a single unit with straightforward access. Shared triple-decker stacks or mill-conversion runs through brick chases run $280-$340 due to the additional diagnostic time, camera inspection, and coordination with multiple units. Vent repair or replacement of damaged components, typically $120-$240 in labor and materials, is quoted separately with a written price before any work starts. Bird guard installation runs $85-$150 depending on roof access. We don’t quote per-vent teaser prices that balloon on the invoice. One flat price per system, agreed in writing, every time. Estimates are free, and there’s no charge if we arrive and find the vent doesn’t need cleaning.
| Service | Lowell Price Range |
|---|---|
| Standard single-unit dryer vent cleaning | $180 - $280 |
| Shared stack / triple-decker cleaning | $280 - $340 |
| Vent repair (transition duct, cap, etc.) | $120 - $240 |
| Bird guard installation | $85 - $150 |
Call (323) 918-4345 for an exact quote on your specific setup.
We Also Serve Cities Near Lowell
Our crews work throughout the Merrimack Valley, including Dryer Vent Cleaning in Lowell and surrounding communities. We regularly schedule jobs in Andover, Lawrence, Wilmington, and Pinehurst, often routing same-day appointments when a Lowell call finishes early. If you’re in a neighboring town and dealing with slow drying or a shared vent stack in multi-unit housing, our Dryer Vent Cleaning team can likely get to you within a day or two.
Serving Lowell, MA - Our Local Coverage Area
We’re based in the Lowell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Lowell
Your vent likely shares a masonry chase with one or two other units, so you’re catching lint from upstairs neighbors in addition to your own. The chase was never designed for modern dryers and has rough interior surfaces that trap debris. We map the full stack and clean from termination to source, not just your branch line. Call (323) 918-4345 to schedule a camera inspection.
We use camera-guided Rotobrush agitation with staged access points through the chase, plus HEPA-contained negative air to capture the brick-dust and lint mixture these systems produce. It’s slower than standard cleaning but necessary for these deposits. Most mill-conversion jobs run $280-$340 and take two to three hours.
Yes. We bring portable power and up to 150 feet of hose, and we use compact HEPA units that don’t need van-mounted generators. We may need to coordinate building access to minimize hose runs across sidewalks, but we’ve worked with Lowell’s parking restrictions for years.
Multiple units reporting longer dry times, a burning smell from any unit’s laundry area, or visible lint accumulation around the exterior cap are all warning signs. In shared stacks, one unit’s problem is often everyone’s problem. We recommend annual inspection for buildings with shared chases.
Not always, but often yes. We can sometimes clean from the exterior termination and roof access points, but interior branch connections and transition ducts require entry to each unit. We coordinate with landlords or property managers and schedule to minimize tenant disruption. The written quote includes any access coordination time.
Ready to get your dryer running safely and efficiently? Call (323) 918-4345 for a free estimate. We’ll ask about your building type, give you a straight price range over the phone, and schedule a time that works around your household’s routine. Every visit comes with our written price upfront, shoe covers and drop cloths from the moment we walk in, and a photo of the clean-up before we leave, all backed by our 365-Day Done Right Promise.
Written by Paul Adeyemi, Owner at Morton’s Air Duct Cleaning, serving Lowell since 2005.




Before
After
Before
After
Before
After