Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Frisco
Air duct cleaning in Frisco typically runs $350-$650 for a full residential system and $800-$2,400 for commercial properties, with most jobs completed in a single scheduled visit. Our crews dispatch from the Dallas-Fort Worth office and cover Frisco neighborhoods from Stonebriar to Phillips Creek Ranch without the wait times you’d expect from out-of-market operators. Call (323) 918-4345 for a written estimate before any work starts.
We’ve been in enough Frisco attics to know the real problem here isn’t age. It’s original construction debris sealed inside flex-duct systems since the day the builder turned over the keys. Our Air Duct Cleaning team treats every home like the family lives there, because they do. Shoe covers at the door, drop cloths on the floors, and quiet equipment when there’s a nap happening down the hall.
Why Morton’s Air Duct Cleaning Is Frisco’s Preferred Air Duct Cleaning Company
Frisco families call us back because we show them what we found. Every job ends with a photo of the clean-up before our crew leaves, and every price is written and agreed before a single tool gets unboxed.
Paul Adeyemi built Morton’s Air Duct Cleaning in 2005 on the idea that a homeowner deserves to know exactly what will happen inside their house and exactly what it will cost. That hasn’t changed. Our technicians are background-checked, uniformed, and trained to the Cedarwell C.A.R.E. values. They notice the dog on the floor. They work around nap schedules. They don’t rush.
When you call (323) 918-4345, a live person answers. Not a chatbot, not a voicemail tree. Scheduling is coordinated through our Dallas-Fort Worth office, and crews serve Frisco locally with Rotobrush and Nikro equipment, not rental gear from the hardware store.
Residential Air Duct Cleaning in Frisco
Residential Air Duct Cleaning in Frisco means source-removal work on post-2000 production-built homes with flex-duct systems in attic cavities, not the aging metal ductwork you’d find in older DFW suburbs. A typical full-system residential clean in Frisco runs $350-$650 depending on system size, accessibility, and whether we find crushed or disconnected runs that need reconnection and sealing. Most Frisco homes fall in the 2,500-4,500 square foot range with 12-20 supply registers and 2-4 returns.
Our process starts with a video inspection so you see what we see. We use Rotobrush agitation tools under negative pressure from Nikro HEPA-filtered collection systems, pulling debris from the duct walls rather than just vacuuming what floats past. For Frisco’s specific problems, we pull every register boot to check for packed cellulose insulation, a shortcut production builders here repeated for years.
What We Find in Frisco Attics
Disconnected boots. Crushed flex runs. Insulation packed so tight around the collar that the blower has been fighting restriction since 2012. These aren’t hypotheticals. In Stonebriar, we pulled registers on a 2012 build and found cellulose blow-in insulation packed tight around every supply boot collar, the original insulation crew had blown into the attic after the flex was run and never sealed the openings. Our tech ran a camera inspection and found two crushed runs off the air handler, one completely disconnected at the boot, dumping conditioned air straight into a 140°F attic. After source removal with agitation tools under negative pressure, we re-sealed the collars and reconnected the runs. The homeowner said the upstairs bedrooms had never held temperature like that before.
Protecting Your Home During the Work
Shoe covers and drop cloths are standard on every visit, included, not extra. We cover floors from the entry to the attic access and back. Pet-safe product choices where available. If there’s a toddler napping, we’ll use the quieter settings on our equipment and coordinate register-by-register to minimize disruption. The written price you get before we start is the price on the invoice. Every time.
Commercial Air Duct Cleaning in Frisco
Commercial Air Duct Cleaning in Frisco covers office suites, retail spaces, medical clinics, and daycare facilities in corridors like the Dallas North Tollway and Preston Road corridors where commercial build-out accelerated after 2010. Commercial systems in Frisco typically run $800-$2,400 depending on square footage, system complexity, and whether the space was built out from raw shell or inherited an existing HVAC configuration. Most commercial jobs require after-hours scheduling to avoid disrupting operations.
Frisco’s commercial inventory shares the same post-2000 DNA as its housing stock. Flex ductwork in drop ceilings, often installed by the lowest bidder during tenant finish-out, with boots that loosen from slab movement on Blackland Prairie clay. We inspect with video, document before and after with photos, and provide the written scope and price before any work begins. The 365-Day Done Right Promise applies to commercial work too.
After-Hours and Low-Disruption Scheduling
We clean Frisco commercial spaces on evenings and weekends so your team doesn’t lose productivity. Our crews work systematically, zone by zone, with HEPA containment so neighboring tenants don’t see dust. We coordinate with property managers at Frisco Square, Hall Park, and similar mixed-use developments where access protocols matter.
Documentation for Property Managers
Every commercial job includes photo documentation of the clean-up and a summary report of what was found, what was done, and any recommendations for mechanical repairs outside our scope. Property managers in Frisco use these for tenant files, lease turnarounds, and insurance documentation. No vague invoices. No mystery charges.
Trusted Brands We Service in Frisco
We clean and service ductwork connected to Honeywell, Aprilaire, and Abatement Technologies systems, and we stock common fittings and register boots for fast turnaround on the repairs we find. Frisco’s rapid growth means some HVAC contractors installed equipment during peak demand periods when supply chains were strained, we’ve seen mismatched components and improvised connections that need the right part, not a creative workaround. Our trucks carry the inventory to seal, reconnect, and properly terminate flex runs on the same visit. No waiting for a parts order from Dallas while your attic leaks conditioned air.
Common Air Duct Cleaning Problems We See in Frisco Homes
- Register boots packed with cellulose insulation. Production builders in Frisco’s rapid-growth corridors blew attic insulation after running flex duct and never sealed the openings. That debris gets pulled into the supply system every time the blower cycles. A standard vacuum-and-go clean without pulling boots won’t touch it.
- Crushed, kinked, or disconnected flex runs. Years of 140°F+ attic heat and seasonal slab movement from expansive Blackland Prairie clay loosen connections at the boot. Technicians find these during camera inspection, and the real fix is reconnecting and sealing, not just cleaning around the damage.
- Original construction debris sealed inside since certificate of occupancy. Drywall dust, sawdust, flex shavings, these materials were never removed before the family moved in. Homes breathe them for a decade before anyone opens a register. NADCA-standards source removal is what actually fixes it, not what budget operators sell.
- Systems recirculating pollen and attic infiltration six months a year. Frisco’s HVAC runs heavy from May through October, continuously cycling North Texas cedar, elm, and grass pollen through ductwork with compromised seals. Clean ducts with intact connections make a measurable difference in particle load.
Pricing for Air Duct Cleaning in Frisco, TX
Here’s what air duct cleaning costs in Frisco’s market:
| Service | Typical Range |
|---|---|
| Residential full-system cleaning (2,500-3,500 sq ft) | $350-$500 |
| Residential full-system cleaning (3,500-5,000+ sq ft) | $500-$650 |
| Commercial cleaning (per system / sq ft) | $800-$2,400 |
| Video inspection with written report | $150-$250 (credited toward cleaning if scheduled) |
| Boot reconnection and sealing (per boot, when found) | $75-$150 |
| Crushed flex-run replacement (per run) | $125-$275 |
What moves the price: system size, register count, attic accessibility, and whether we find mechanical issues that need fixing to make the clean worth doing. We don’t quote per-vent teaser prices that balloon on arrival. One flat price per system, agreed in writing, before work starts. Estimates are free. Call (323) 918-4345 to schedule.
We Also Serve Cities Near Frisco
Our crews regularly work in Prosper, Aubrey, Little Elm, and Celina, the same post-2000 growth corridor with the same production-build ductwork issues. If you’re just outside Frisco city limits, we can likely still cover you. Air Duct Cleaning in Frisco is our core market, and we know the surrounding communities well enough to recognize which builders used which shortcuts.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Frisco
The age of the house isn’t the problem; it’s what got sealed inside during construction. Frisco’s production builders rarely cleaned flex ducts before certificate of occupancy, so families have been breathing drywall dust, sawdust, and insulation fragments since move-in day. A 2012 house can have worse air quality than a 1980s house with metal ductwork that was actually cleaned. Call (323) 918-4345 for a video inspection that shows you exactly what’s in there.
It means cellulose or fiberglass insulation is entering your supply system, almost always because the boot collar wasn’t sealed when attic insulation was blown in. This is one of the most common findings in Frisco’s post-2000 subdivisions. The fix is pulling the register, removing the packed insulation, and properly sealing the boot, not just vacuuming the register face. We include this in our scope when we find it, with the price written before we start.
Yes, and more often than homeowners expect. The combination of attic heat and Blackland Prairie clay slab movement loosens connections on 5-to-20-year-old flex systems. Our video inspection catches them before we quote the full job. If we find a disconnected boot dumping air into a 140°F attic, we’ll show you the camera feed and quote the reconnection separately. The clean alone won’t fix a mechanical failure. Call (323) 918-4345 and we’ll walk you through what we found.
For most Frisco homes with the original construction debris load, we recommend a thorough source-removal clean every 5-7 years after the initial remediation, with a video inspection at year 3 to check boot seals. Homes with pets, allergy-sensitive family members, or recent renovation may need more frequent attention. The heavy pollen load and near-constant blower operation from May through October accelerate particulate buildup compared to milder climates.
Older suburbs have metal ductwork that corrodes and leaks at seams; Frisco has flex ductwork that crushes, kinks, and disconnects at boots, with construction debris as the primary contaminant rather than decades of accumulated dust. The tools are similar, but the diagnostic approach differs. We pull more boots in Frisco. We find more insulation infiltration. And the “clean” often reveals a mechanical fix that was the real problem all along.
Written by Paul Adeyemi, Owner at Morton’s Air Duct Cleaning, serving Frisco since 2005.




Before
After
Before
After
Before
After