Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Coil Cleaning: The Los Angeles Owner’s Guide
If you own a portable HEPA air scrubber, negative air machine, or air purifier built by Abatement Technologies, keeping the evaporator and condenser coils clean is the single most important maintenance step you’ll take. Clogged coils force the unit to work harder, shorten the life of the compressor, and in Los Angeles, where dust and wildfire ash settle on everything, they load up faster than the owner’s manual suggests. Morton’s Air Duct Cleaning stocks Abatement Technologies-compatible coil cleaning supplies and performs coil cleaning on Abatement Technologies units across the LA basin. Our typical installed coil cleaning for a residential Abatement Technologies unit runs $140-$260, depending on how much grime has built up and where the unit sits in your home.
Most Los Angeles owners don’t notice the coil problem until the unit stops hitting its target temperature or starts cycling longer than it used to. By then, the coil has usually been running restricted for months. We see it in homes from Hollywood Hills to Inglewood to Pasadena: the coil looks fine from the outside, but pull the access panel and there’s a gray mat of dust and pet hair pressed against the fins, cutting airflow by half or more.
Which Abatement Technologies Models This Applies To
Abatement Technologies makes several product lines with serviceable coils, and each one has slightly different access points and cleaning requirements. The main groups we work on in Los Angeles homes are the CAP Series portable air scrubbers, the PREDATOR series (models like the PRED750 and PRED1200) used in residential mold and water damage jobs, and the VA Series whole-home air purifiers. Here’s the compatibility gotcha: the CAP and PREDATOR units use a small, tightly-spaced evaporator-style coil that’s easy to reach from the side panel, but the VA Series coil sits behind the main filter housing and requires more disassembly. If you’re not sure which one you have, the model number is printed on a silver data plate near the power cord entry or on the back panel. A photo of that plate sent to us by text is enough for us to confirm the right cleaning procedure before we ever roll a truck.
When it comes to parts, Abatement Technologies does sell OEM replacement coils, but in our experience, the coil is rarely the failure point. The problem is almost always buildup, not the coil itself. For that reason, we prioritize thorough mechanical and chemical cleaning over part replacement, which keeps the bill lower. If a coil is truly beyond saving, we can source OEM or quality aftermarket equivalents matched to the exact dimensions. We’re an independent service provider, not an Abatement Technologies dealer, which means we’re free to recommend the honest fix rather than the profitable part swap.
Signs Your Abatement Technologies Coil Cleaning Is Overdue
- Unit runs longer to reach the same temperature. When the coil is coated, heat transfer drops. The compressor keeps running, the thermostat keeps asking for more, and your energy bill climbs. In LA’s summer, the difference shows up fast.
- Airflow from the vents feels weak, even on high. A heavily soiled coil restricts air moving through the cabinet. If your Abatement Technologies unit used to push strong air and now feels soft, the coil is usually the first thing we check.
- The unit is louder than it used to be. A restricted coil makes the blower motor work harder against higher static pressure. That strain sounds like a low hum or rattle from the cabinet, especially in a quiet house.
- You can see dust or fuzz around the unit’s intake grill. That’s the visible half of what’s already packed onto the coil. Pet hair and LA’s dry, fine dust are the two biggest contributors in homes from Santa Monica to Silver Lake.
- The coil itself looks gray or black when you remove the access panel. A clean coil shows bright metallic fins. A dirty one looks like someone pressed a wool sweater against it over months of normal operation.
Two of those signs and most owners in the San Fernando Valley and the Westside are looking at a clogged coil. One sign is still worth a look.
Replacement Cost & What’s Included
Here’s what families can expect to pay for Abatement Technologies coil cleaning in the Los Angeles area, installed by Morton’s:
- Standard residential coil cleaning (accessible unit, light-to-moderate buildup): $140-$180. Includes access panel removal, fin-safe cleaning solution, rinse, drying verification, and reassembly testing.
- Heavy buildup or hard-to-access unit (behind ductwork, in attic or crawlspace): $200-$260. Additional labor for access, deeper cleaning, and a second rinse cycle.
- Coil replacement, if an inspection determines cleaning can’t restore airflow: $320-$520 depending on model and part availability. We’ll always clean first and replace only if cleaning fails.
Every job gets a written price before we start, and that price doesn’t move. It’s one of the things we’re known for around Los Angeles: no “Oh, we found a little extra once we got in there” phone call. You know the number before any tool comes out of the truck. The work carries our 365-Day Done Right Promise; if the coil re-clogs or the unit underperforms within a year of our service, we come back and make it right.
What drives the range? Accessibility matters. A coil on an Abatement Technologies unit sitting in an easy-to-reach closet in Culver City costs less to clean than one crammed into an attic in Woodland Hills. Buildup matters too; a unit in a home with two Golden Retrievers will have more pet hair worked into the fins than a unit in a no-pets building.
DIY or Call Us?
There’s one thing an owner can safely do: check how dirty the coil looks. If your unit has a removable access panel, shut off power, remove the panel, and look. If the coil looks dusty but not caked, you can carefully vacuum the surface fins with a soft brush attachment, moving with the fins, not against them. Never use a pressure washer; never use a wire brush; bent fins are worse than dirty fins.
Past that, coil cleaning is a job for someone who knows how to read a service manual and handle a wet process inside an electrical cabinet. Cleaning solution can drip onto control boards and blower motors if the water path isn’t controlled. The coil fins are thin aluminum that bends under almost zero force. We’ve been called to Los Angeles homes where a well-meaning homeowner took a garden hose to a cabinet and shorted the control board, turning a $180 cleaning into a $600 repair. The economics don’t work in DIY’s favor on this one. If you want it done properly without risking your unit, call (323) 918-4345 for a free estimate.
FAQs
In LA’s climate, we recommend inspecting the coil every 12 months and cleaning it every 18 to 24 months for most homes. Homes with pets, open windows, recent construction nearby, or high wildfire smoke exposure in summer may need cleaning every 12 months. Our summers coat outdoor-facing equipment in a fine layer of dust that humidity would otherwise help control, and indoor units in older homes pick up more debris from unsealed vents. Call (323) 918-4345 if you’re not sure whether your unit is past due.
A coil can sometimes be repaired if a few fins are bent, using a fin comb to straighten them back into alignment. That’s a quick, low-cost fix. But if the coil has a refrigerant leak, cleaning won’t help and repair is rarely practical; replacement is usually the honest answer. Good news is that in our Los Angeles service area, leaks are uncommon on Abatement Technologies units we see. The typical problem is buildup, and buildup responds to cleaning.
Most Abatement Technologies coil cleaning jobs on a portable or residential unit take 60 to 90 minutes from arrival to final testing. Heavier buildup or difficult access adds another 30 to 60 minutes. You’ll have a written price in hand before we start, so there’s no guesswork.
Yes. Our trucks carry the fin-safe cleaning solutions and rinsing equipment we use on Abatement Technologies units, plus fin combs, replacement access panel gaskets, and common OEM-equivalent coil replacements for the CAP and PREDATOR lines. We also stock parts for Lennox, Trane, and Carrier units, so one visit can cover multiple pieces of equipment in your home. For less common Abatement parts, we order direct from our distributor and usually have them in 2 to 3 business days.
Written by Paul Adeyemi, Owner, Morton’s Air Duct Cleaning at Morton’s Air Duct Cleaning, serving Los Angeles and nearby areas.
If your Abatement Technologies unit is struggling to keep up, or you just want a clean coil and a clear picture of what it will cost, call Morton’s Air Duct Cleaning at (323) 918-4345. We’ll send a background-checked, uniformed technician who will show you exactly what’s going on before any work begins. Before we start, let me show you exactly what we found and exactly what it will cost to fix it.