Dryer Vent Cleaning in Seattle - One Price, Measured Results

Fast, Reliable Dryer Vent Cleaning Across Seattle

Dryer vent cleaning in Seattle typically runs $150-$275 for a standard single-family home, with most jobs completed in 60-90 minutes and a written price agreed before we start. If your dryer takes two cycles to finish a load or the laundry room feels unusually humid, you’re probably dealing with a blocked vent run, and in Seattle’s damp climate that blockage is often worse than it looks.

Call (323) 918-4345

We dispatch our Dryer Vent Cleaning crews from our Seattle office, so we’re familiar with the pier-and-beam foundations in Wallingford, the hillside crawl spaces on Queen Anne, and the mid-century rambler layouts throughout Beacon Hill. We’ve been working on Seattle’s housing stock since 2005, and we’ve learned that a dryer vent run here isn’t just a tube with lint in it. It’s a pathway that lives in 75-85% relative humidity for nine months of the year, where lint that dried out yesterday gets wet again tomorrow and mats down into something far more stubborn than a simple dust bunny.

Every visit starts with shoe covers and drop cloths before we touch anything. We work around nap schedules when there’s a toddler down the hall, and we keep the vacuum and rotary tools on their quieter settings when a dog’s settled on the laundry room mat. You’ll get a written price before we begin, and a photo of the clean-up before we leave. Call (323) 918-4345 for a free estimate.

Why Morton’s Air Duct Cleaning Is Seattle’s Preferred Dryer Vent Cleaning Company

Seattle homeowners call us back because we treat their houses like homes, not job sites. Our technicians are background-checked, uniformed, and trained to the Cedarwell C.A.R.E. values, which means we explain what we’ll do and what it costs before we do it. No one likes a stranger with power tools who starts work before they’ve said hello and shown the price.

We’ve built our reputation one visit at a time in neighborhoods from Fremont to Capitol Hill. Reviews from Seattle customers consistently mention the same things: we showed up when we said we would, we protected the floors, and the invoice matched the written estimate. That shouldn’t be remarkable, but in this industry it is.

Our response time to Seattle addresses is same-week for standard cleanings, and we coordinate dispatch from our local Seattle office so we’re not guessing about bridge traffic or which hillsides slow the route. We know the difference between a flat lot in Wallingford and a steep driveway on Queen Anne, and we bring the right extension gear for both.

The real trust-builder, though, is what we find and show you. We camera-inspect vent runs before and after cleaning, so you see the lint mass, the moisture staining, the disconnected collar, or the crushed flexible duct. In Seattle’s older homes, there’s almost always something worth seeing.

Dryer Vent Installation in Seattle

Dryer Vent Installation in Seattle often means replacing a decades-old flexible duct run with rigid aluminum routed through a damp crawl space, and a typical installation here runs $350-$650 depending on length, access, and whether we need to core a new exterior wall penetration. Seattle’s housing stock - those 1910s-1940s Craftsman bungalows and postwar mid-century homes in Wallingford, Fremont, and Beacon Hill - was never designed for modern dryer loads, and the original vent runs are frequently undersized, improperly sloped, or made of materials that degrade fast in marine humidity.

We install to current IRC guidelines with rigid aluminum or galvanized steel, proper slope for condensation drainage, and exterior termination caps with functioning backdraft dampers. Every installation gets a written price before we start and is backed by our 365-Day Done Right Promise.

Under-Subfloor and Crawl-Space Routing

Many Seattle homes route dryer vents through vented crawl spaces beneath pier-and-beam or cripple-wall foundations. We use Rotobrush and Nikro equipment to navigate these tight spaces, and we seal all joints with foil tape rated for moist environments, not the cloth-backed tape that fails in Seattle’s humidity.

Exterior Wall and Roof Termination Options

When a crawl-space run isn’t viable, we can core a new exterior wall penetration or install a roof jack termination. We factor in Seattle’s driving winter rains and select caps with proper weatherstripping and bird screening. No more flappers stuck open by lint buildup.

Dryer Vent Repair in Seattle

Dryer Vent Repair in Seattle typically addresses the damage that moisture, hillside settling, and decades of neglect cause in this city’s unique housing stock, with most repairs running $200-$450 depending on how much of the run needs replacement and how accessible it is. The most common call we get isn’t from a vent that’s completely blocked. It’s from a homeowner who’s noticed the dryer runs hot, the laundry room smells musty, or their energy bill has crept up, and they don’t know why.

We find the why with a camera. In Seattle’s hillside neighborhoods, we regularly discover flexible duct pulled apart at collars, sections crushed by shifting framing, or lint packed so densely with moisture that it has the consistency of felted wool. We repair with rigid aluminum, proper supports, and sealed joints that won’t fail again in the damp.

Disconnected and Collapsed Sections

Hillside settling on Queen Anne and Capitol Hill pulls flexible duct apart at connection collars, dumping moist exhaust and lint into the crawl space instead of outside. We replace the damaged section, re-support the run to prevent future sagging, and seal with moisture-rated materials.

Lint Blockage and Moisture Damage Removal

When wet lint has matted into an impenetrable plug, we don’t just poke a hole through it. We remove the affected duct section, clean it thoroughly or replace it, and inspect the dryer blower housing for scorch marks. That last step matters. A heating element working against a blocked vent is a fire risk.

Trusted Brands We Service in Seattle

We stock parts and service equipment from Aprilaire, Abatement Technologies, Guardsman, and Rotobrush, which means most Seattle repairs don’t wait on shipping. Our Nikro HEPA vacuums and Rotobrush agitation tools handle the dense, moisture-compacted lint we find in this climate without bogging down. When we need replacement duct, caps, or transition fittings, we carry galvanized steel and aluminum rated for marine environments, not the light-gauge stuff that corrodes in a Seattle crawl space. Fast turnaround matters because a dryer vent that’s blocked in October, when the rains return and laundry loads spike, needs to work now, not next week.

Common Dryer Vent Cleaning Problems We See in Seattle Homes

• Wet lint matting into mold-colonized plugs. In Seattle’s hillside crawl-space homes, dryer vent runs routed under the subfloor through vented cripple-wall foundations sit in 75-85% RH marine humidity that re-wets lint daily. What starts as fluffy accumulation becomes a dense, mold-crusted mass that no household vacuum can touch.
• Hillside settling pulling flexible duct apart at collars. On Queen Anne and Capitol Hill, uneven foundation movement separates duct sections at connection points. The dryer still runs, but it’s dumping moist, lint-laden air into the crawl space, where it feeds mold growth and attracts pests.
• Original transition ducts made of unsafe or degraded material. Many Seattle homes still have white vinyl or thin foil transition ducts behind the dryer, materials that are a fire hazard even when new and that deteriorate rapidly in damp laundry rooms. We replace these with UL-listed rigid or semi-rigid aluminum every time.
• Exterior flappers frozen shut by lint and moisture. Seattle’s combination of lint dust and persistent moisture causes exterior termination caps to stick closed or stick open. A stuck-closed cap forces exhaust back into the house. A stuck-open cap lets rain, rodents, and cold air in.

Pricing for Dryer Vent Cleaning in Seattle, WA

We Also Serve Cities Near Seattle

Our crews regularly work in Seattle and the surrounding communities, including Medina, Bellevue, Mercer Island, and Kirkland. Whether you’re on a lakeside property with specific moisture challenges or a hillside home with crawl-space access issues, we bring the same written-upfront pricing, photo-documented clean-up, and 365-Day Done Right Promise.

FAQs About Dryer Vent Cleaning in Seattle